How much does Hover cost in 2026? Every plan and per-report price.
Hover costs $29 to $139 per project on its pay-as-you-go Starter tier, or $9 to $119 per project on Pro, which runs $999 a year with no user limit. A roof-only report on a typical single-family house is $49 on Starter and $29 on Pro. Your first three projects are free, no card required. Every number on this page was read off hover.to/pricing on September 11, 2026, and where our review disagrees with the live page, the live page wins.
No affiliate relationship with Hover. Links go straight to hover.to. How we review
Construction-plan prices. Pro takes $20 off every project. Insurance plans use a separate, higher per-project list (§03). Enterprise is quote-only.
The Short Answer
The cheapest way to get one Hover measurement is free: the Starter tier gives you three projects at no charge with no credit card. After that, a roof-only report is $29 / $49 / $69 for a simple, average, or complex roof, and a full-exterior model is $59 / $99 / $139. Pro is $999 a year and knocks $20 off every project ($9 / $29 / $49 roof-only), so it pays for itself at about 50 projects a year, four a month.
Realistic monthly cost for a roofer on average roof-only reports: about $373 at 10 a month, $953 at 30, and $2,403 at 80 on Pro (subscription spread monthly plus $29 per report). On Starter those same volumes are $490, $1,470, and $3,920. At 80 a month you should be on an Enterprise quote, which Hover says can be flat-rate.
What is not included: the Pro fee buys no projects; every report is still billed. Expedited one-hour delivery is $19 to $39 extra. Supplier pricing and direct ordering need your own ABC, SRS, Beacon, or QXO accounts. The CRM you sync to (JobNimbus, AccuLynx) is a separate bill. And the pricing page shows no monthly Pro price, only $999 annual.
Starter, Pro, Enterprise: one price list, one $20 difference.
Hover does not sell plans the way a CRM does. There is no bundle of included reports and no seat count. Starter is a per-project price list. Pro is a $999 annual fee that lowers every line on that list by $20 and adds the estimating and integration layer. Enterprise is that plus volume pricing and admin controls, quoted by sales. Verified against hover.to/pricing on September 11, 2026.
Tier 1 · Pay-as-you-go
Starter
No subscription. Pay per project, first three free.
$29–$139 per project · 12-hr typical turnaround
- ✓First 3 projects free, no credit card
- ✓Interactive 3D model · measurements · photo markups
- ✓Invite-to-scan · virtual walkthroughs · export
- ✓3D design preview · saved designs · product catalog
- ✓API access · email and chat support
- —No 2D Design · no branded estimates · no CRM sync
Tier 2 · Subscription + per project
Pro
$20 off every project plus the estimating layer
$9–$119 per project · 8-hr typical turnaround · unlimited users
- ✓Everything in Starter
- ✓$20 less per project, every row
- ✓2D Design · estimates with logo · estimate comparison
- ✓Production-ready estimates · labor and fees · sales estimate
- ✓CRM integrations · pricing integrations · direct ordering
- ✓Performance dashboard · team analytics
Tier 3 · Multi-location
Enterprise
Volume pricing and admin controls, quoted by sales
"Custom volume pricing—including flat-rate options" · 4-hr typical turnaround
- ✓Everything in Pro
- ✓Custom product lists
- ✓Multi-org management · SSO and advanced permissions
- ✓Dedicated support and onboarding · custom workflows
- ✓Early product access
- —"Talk to Sales" button, no published rate
Verified September 2026 · Where Our Review Is Out of Date
Our Hover review (last updated July 2026) and our Hover vs Roofr comparison describe Pro as $99/month with "unlimited residential projects" and per-project fees removed. The live pricing page does not say that. As of September 11, 2026:
- →Pro still bills per project. The subscription lowers each price by $20; it does not include any reports. A roof-only average house is $29 on Pro, not $0.
- →Pro is shown as $999/year, not $99/month. The page says annual saves 16%, which implies roughly $99 monthly, but no monthly price is displayed.
- →The free offer is three projects, not one. Our review says Hover "does run a free first-project offer periodically." The page now says three, no card, on both construction and insurance Starter.
- →The $29–$139 Starter range still holds for construction plans (roof-only simple to full-exterior complex). The insurance list runs higher, $29–$299.
Both pages are queued for an update. Until then, this page is the source of truth for Hover prices on this site.
What one Hover report costs, by house size.
Hover prices by structure complexity, not square footage of roof. Simple is "garage, shed, or small home with a basic A-frame roof, up to 4 facets." Average is "typical single-family home with a few roof sections, 5–8 facets." Complex is "large or custom home with multiple rooflines or features, 9+ facets." Most of the houses you bid are Average.
| Report type | Structure | Starter | Pro | Pro saves |
|---|---|---|---|---|
| Roof-only | Simple · up to 4 facets | $29 | $9 | $20 |
| Average · 5–8 facets | $49 | $29 | $20 | |
| Complex · 9+ facets | $69 | $49 | $20 | |
| Full exterior | Simple · up to 4 facets | $59 | $39 | $20 |
| Average · 5–8 facets | $99 | $79 | $20 | |
| Complex · 9+ facets | $139 | $119 | $20 | |
| Interior | Simple · under 200 sq ft | $29 | $9 | $20 |
| Average · 201–600 sq ft | $59 | $39 | $20 | |
| Complex · over 600 sq ft | $89 | $69 | $20 | |
| Expedited delivery | 1-hour, any project | +$39 | +$19 | $20 |
Source: hover.to/pricing, construction plans, read September 11, 2026. Typical turnaround is 12 hours on Starter, 8 on Pro, 4 on Enterprise; Hover notes "actual processing may vary based on volume and complexity." The page lists no tax, minimum, auto-renewal, or cancellation footnotes.
The thing to notice is that the Pro discount is a flat $20 on every row, including the expedite fee. That turns the Pro decision into arithmetic: $999 divided by $20 is 50 projects. Order fewer than 50 a year and Starter is cheaper unless you need the Pro features. Order more and Pro is cheaper before you count a single feature.
Same house, roughly double the price on the insurance plan.
Hover's pricing page has a Construction / Insurance toggle. The insurance side is for carriers, adjusters, and desk reviewers, and it has the same three tiers, the same $999 Pro fee, and the same three free projects. The per-project prices are what change. If you are a restoration contractor, you buy under Construction; this table is here so you know what the adjuster across the table is paying.
| Report type | Simple | Average | Complex |
|---|---|---|---|
| Roof-only · Starter / Pro | $49 / $29 | $99 / $79 | $149 / $129 |
| Full exterior · Starter / Pro | $99 / $79 | $199 / $179 | $299 / $279 |
| Interior · Starter / Pro | $29 / $9 | $59 / $39 | $89 / $69 |
Source: hover.to/pricing, insurance plans, read September 11, 2026. Pro on the insurance side also adds branded claim reports. Having worked the appraisal and adjusting side, the price gap makes sense: a carrier is paying for a file that has to hold up on a claim, and Hover prices it that way.
What's not in the per-report price.
Hover's list is short compared to a CRM's. There is one paid add-on, one thing that is not a line item but people assume is, and a few things you pay for elsewhere.
Expedited one-hour delivery
Pricing page, verbatim: "$39/project on Starter, only $19/project on Pro." Standard turnaround is 12 hours on Starter and 8 on Pro, which is fine for a bid you are writing tomorrow and not fine for a homeowner sitting at the table. If you close same-visit, budget the expedite on every sales appointment; a Pro roof-only average house with expedite is $48, and a full exterior is $98.
Instant Design and the 3D model
Neither is a separately priced product. The pricing page lists "Interactive 3D models," "3D design preview," "Saved designs," and "Live product catalog" as included on every tier, Starter included. "2D Design" is the one design feature gated to Pro and Enterprise. If you came here looking for a 3D-model fee or an Instant Design subscription, there is not one; the model is the project you already paid for.
Seats
Pricing page, verbatim: "Pro covers your entire team—there's no limit on the number of users. All users are on the same Pro plan and are billed under a single credit card." Starter has nothing to put a seat on. This is the single most contractor-friendly thing about Hover's pricing: a ten-rep sales floor costs the same $999 as a solo.
The CRM and supplier accounts Pro integrates with
Pro turns the CRM, pricing, and ordering integrations on; it does not pay for the other end. JobNimbus, AccuLynx, and your ABC Supply, SRS, Beacon Pro+, or QXO account are all their own invoices. Hover's Estimatics integration for Xactimate is listed as included on every tier; Xactimate itself is a Verisk bill.
Monthly Pro billing, Enterprise rates, cancellation terms
Three things the public page does not tell you. A monthly Pro price: the page says $999 annual "saves 16%," which implies about $99 a month, but the number is not displayed. Enterprise pricing: "Talk to Sales," with a note that volume pricing can include flat-rate options. And there are no auto-renewal or cancellation footnotes at all. Ask all three before you put $999 on a card.
Pro pays for itself at 50 projects a year. Here is the year.
Annual totals on construction-plan roof-only average reports ($49 Starter, $29 Pro) and full-exterior average ($99 / $79). Pro column includes the $999 subscription. No expedite fees.
| Projects per year | Roof-only · Starter | Roof-only · Pro | Full exterior · Starter | Full exterior · Pro |
|---|---|---|---|---|
| 24 (2/mo) | $1,176 | $1,695 | $2,376 | $2,895 |
| 50 (break-even) | $2,450 | $2,449 | $4,950 | $4,949 |
| 120 (10/mo) | $5,880 | $4,479 | $11,880 | $10,479 |
| 360 (30/mo) | $17,640 | $11,439 | $35,640 | $29,439 |
| 960 (80/mo) | $47,040 | $28,839 | $95,040 | $76,839 |
Math: Starter = projects × Starter price. Pro = $999 + projects × Pro price. The break-even is exactly 49.95 projects on every row because the discount is a flat $20.
Two practical notes. First, the 50-project line is the pure-price break-even; if you want the branded estimates, CRM sync, or the 8-hour turnaround, Pro is worth it below 50. Second, past about 30 a month you are handing Hover $11K to $29K a year, and the Enterprise "flat-rate options" line on the pricing page exists for exactly that customer. Get the quote. The most-upvoted critical thread on G2 (where Hover averages 4.3/5) comes from contractors running 15+ projects a month who feel the Pro-plus-per-project stack in ways the marketing does not mention, and the table above is the math behind that complaint.
What a roofer pays at 10, 30, and 80 reports a month.
Roof-only, average structure, no expedite. Pro subscription spread as $83.25 a month ($999 ÷ 12). Simple-roof and full-exterior figures in the notes so you can slide the number toward your own mix.
10 reports / month
One-truck retail roofer
Two or three bids a week, closes at the table when he can
- Starter · 10 × $49$490
- Pro · 10 × $29$290
- Pro subscription ÷ 12$83
Simple roofs only: $173 on Pro, $290 on Starter. Full exterior average: $873 Pro, $990 Starter. At this volume Pro already beats Starter by $117 a month.
30 reports / month
Two or three sales reps, one office
Retail and some insurance, siding packages on maybe a third of jobs
- Starter · 30 × $49$1,470
- Pro · 30 × $29$870
- Pro subscription ÷ 12$83
Swap 10 of those for full-exterior models ($79) and it is $1,453. Extra seats for the reps: $0. This is the volume where the Pro discount has already paid the subscription three times over.
80 reports / month
Storm-season production shop
Canvassing crews and an estimator writing scopes all day
- Starter · 80 × $49$3,920
- Pro · 80 × $29$2,320
- Pro subscription ÷ 12$83
Do not pay this on a card. Hover's Enterprise tier says "custom volume pricing—including flat-rate options." Also read §07: a storm shop measuring roofs nobody is home for is on the wrong tool anyway.
Three free projects is enough to find out if your homeowners will take the photos.
Hover's page, verbatim: "Get your first 3 projects for free—no credit card needed." Price is the easy part of the Hover decision. The photo capture is the hard part. The model needs a person at the house shooting eight guided photos, and an older homeowner or an absentee landlord can turn a $29 report into a second trip. Burn the three free projects on three real customers, not your own house, and you will know whether this tool fits your sales motion before you spend a dollar.
Starter tier · pay-as-you-go after the third project · no affiliate link, we earn nothing if you sign up
Spend the three free projects on
- A tree-covered lot where satellite failed youRoof-only
- A siding-plus-roof bid you'd normally tape by handFull exterior
- A homeowner over 65 taking the photos aloneThe real test
- Compare each against a $13 Roofr reportSame address
If two of three homeowners need you to come back and shoot the photos yourself, stop looking at the per-report price and start counting windshield time.
Hover vs Roofr, EagleView, and iRoofing at your report count.
Roof-only measurement, monthly, cheapest legitimate path for each vendor. Hover is Pro at $29 per average roof plus $83 subscription. Roofr is Essentials annual ($209) plus $13 reports, with the free tier's $19 reports in parentheses. EagleView is Premium Roof Reports at the $38 average I actually pay, with the $24.25 published floor in parentheses. iRoofing is its flat subscription with DIY measurement.
| Reports / month | Hover Pro | Roofr | EagleView | iRoofing |
|---|---|---|---|---|
| 10 | $373 | $339 ($190 free tier) | $380 ($243 floor) | $107–$149 flat |
| 30 | $953 | $599 ($570 free tier) | $1,140 ($728 floor) | $107–$149 + HD overage |
| 80 | $2,403 (get a quote) | $1,249 | $3,040 (get a quote) | $107–$149 + HD overage |
Sources: Hover from hover.to/pricing, verified September 11, 2026. Roofr from our Roofr pricing page (July 2026: free Starter with $19 reports, Essentials $249/mo or $209 annual with $13 reports, $10 ESX). EagleView from our EagleView review (April 2026: Premium from $24.25, my Louisiana average $38, Bid Perfect $18, Full House from $91). iRoofing from our iRoofing review (April 2026: $149 monthly, $124 on 12 months, $107 on 24 months, three users, unlimited standard-res DIY measurements, 150 HD credits, roughly 25 HD roofs, then per-credit overage that iRoofing does not publish). Competitor prices were not re-verified for this page.
vs Roofr
Roofr is cheaper at every row for a roof-only report and needs nobody at the house. Where the table lies to you: Roofr does not measure walls, so a siding bid means a ladder and a tape, and Hover's $79 full-exterior model is the whole scope in one file. Simple four-facet roofs flip it, too: $9 on Hover Pro against $13 on Roofr.
vs EagleView
Hover Pro and EagleView land within a few dollars at 10 a month and Hover pulls ahead at 30. But adjusters ask for EagleView by name on contested claims, and its $91 Full House report is the closest thing to Hover's full exterior on the aerial side. If 40% of your book is insurance, budget for both like I do.
vs iRoofing
iRoofing's flat $107 to $149 wins on raw cost because you trace the roof yourself from aerial imagery; nobody delivers a report. Its color visualizer works from one street photo and competes directly with Hover's design sell. No Xactimate path and no walls takeoff. For a small retail shop that only needs the roof, it is the cheapest tool on this page.
Where Hover Fits vs Roofr
These two get cross-shopped more than any pair in the estimating category, and the price table above is only half the answer. Roofr is a satellite measurement report at $13 with a $10 Verisk-certified ESX into Xactimate; it wins roof-only volume, storm canvassing, and insurance scopes on price. Hover is a 3D model of the whole exterior built from the homeowner's phone; it wins siding, paint, and full-exterior remodels where the homeowner needs to see the finished house before signing. A lot of established shops run both and pick per job.
The full head-to-head, including tree-cover accuracy, the two Xactimate paths, and who should run both, is in Hover vs Roofr. If neither is obviously right, the estimating software rankings score every measurement and estimating tool we cover on the same seven dimensions.
Who should pay for Hover, and who is overpaying.
If the homeowner has to picture the result before they sign, Hover is the only tool in the category that shows them their own house with the real James Hardie board or the real Sherwin-Williams color on it. One $18,000 siding job that closes at the first visit instead of going to a second bid pays for Pro nine times over. You also get the walls, openings, and trim takeoffs no aerial report produces, and unlimited users for a sales team.
Skip Pro, stay on Starter if: you sell fewer than four of these a month and do not need branded estimates or CRM sync. The $20 discount does not cover $999 below 50 projects a year.
Photogrammetry does not care about canopy. Hover posted zero failures on tree-obstructed lots in the only independent benchmark we have found, where aerial failed about 8% of the time, and on South Louisiana backroad properties that gap is real. If one in four of your satellite reports comes back needing a manual outline fix, a $49 Hover report on those addresses is cheaper than the callback. Use the three free projects on your worst lots first.
Skip if: your lots are open suburban and your CRM already orders Roofr or EagleView for $13 to $38. Pay Hover only for the houses that break the satellite.
If your close is "we're $1,400 under the other guy" and the homeowner never asks what it will look like, you are paying $29 to $49 for a 3D model you will never open. Roofr at $13 or iRoofing's flat $107 to $149 measures the same roof for less, and Roofr's proposal builder with Stripe and GoodLeap financing is the better kitchen-table tool for a price sale. Read the Roofr pricing breakdown before you spend anything here.
Hover needs a person at the house holding a phone. Door-knocking after a hailstorm and adjuster-side catastrophe work both happen before you have that person, and no per-report price fixes a report you cannot order. On contested claims the adjuster is going to ask for an EagleView anyway, which means paying twice. Insurance-heavy books should start at the EagleView review, and price Roofr's $13 report plus $10 ESX for the retail side.
Exception: a restoration shop that also sells full-exterior upgrades on top of the claim. That shop runs EagleView for the scope and Hover for the upsell, and the $999 is the cheapest line on its software bill.
The questions everyone asks about Hover's price.
How This Page Was Built
Every Hover number on this page was read off hover.to/pricing on September 11, 2026: both the construction and insurance price lists, all nine structure rows, the expedite fee, the $999 Pro price, the three-free-projects offer, the no-user-limit language, and the turnaround times. Where our Hover review and Hover vs Roofr disagree (both describe Pro as $99/month with per-project fees waived), the live page wins and both are queued for an update. Roofr, EagleView, and iRoofing figures come from our own coverage and were not re-verified for this page. We have no affiliate relationship with Hover.
Three things I could not confirm from the public page: the monthly Pro price (only $999 annual is displayed, with a "save 16%" note), Enterprise rates, and any auto-renewal or cancellation terms. Ask sales all three before you commit to a year. For the feature-by-feature call, the Instant Design workflow, and the Connected Platform rough edges, the full Hover review is the place.
Still Deciding Between Hover, Roofr, EagleView, and iRoofing?
Four measurement tools, and each one bills differently. Which one is right depends on how you sell and whether anyone is home when you need the measurement. Our matching tool asks a few questions about your trade, volume, and insurance mix and hands you a ranked shortlist.
Find the Right Measurement Tool →